34" Cord, 3-pin Amp

Heater, FloThru, BWG BP,5.5kW,230v, w/ Plug-n-Click

This heater DOES include m7 sensors and split nuts, but DOES NOT include tailpieces or gaskets.

Flow Thru Heater Assembly used in Sundance Spas, Spa Builders and Pinnacle Spa Controls Stainless steel 2-1/4" x 15" with 5.5kW/230v, 1/8"npt pressure switch tap, (2) 10-32 x 3/8" mounting stud. Tailpieces and gaskets sold separately. Pressure switch not included

Heater, FloThru, BWG BP, 5.5kW, 230v, w/PnC, Titanium

Heater, FloThru, Balboa Water Group, BP100, 5.5kW

Heater, FloThru, United Spa Controls, 15", 5.0kW 230V

Therm Products C2550-0802ET replacement 5.5kW/230v flow thru heater assembly made for use on Morgan Spas. 2" x 15" stainless steel flo-thru heater assembly with mounting studs, hi-limit mounting stud, pressure switch tap, and (2) split nuts. The installed 5.5kW element can be used for...

Applied Computer ControlsStainless steel flo-thru replacement heater assembly. Measures 12-1/2" x 2" and has (2) mounting studs, pressure switch tap at 0 degrees from the heater terminals, external thermowell and a 5.5kW element. Commonly found on the ACC (Applied Computer Controls) STMD1000 series control...

Heater, FloThru,BWG WaterPro 6000B,2"x15",5.5kW,w/M7 Sen,Gen

Brett Aqualine EM100, EM190Also used in Hydro-Quip pre-1997 packs. 15" heater manifold assembly includes 5.5kW/230v element. Stainless steel manifold has top indent grooves and a 1/8"npt pressure switch tap. Shipped with 2" tailpieces, gaskets and split nuts. Pressure switch not includedAlso used in ACURA...

Balboa Water GroupStainless steel replacement heater assembly without mounting studs, 4.0kW/230v, 2" x 15". Includes M7™ sensors. Tailpieces and gaskets sold separately. Made for Balboa VS and Balboa SUV M7™ control systems.

This heater DOES include m7 sensors and split nuts, but DOES NOT include tailpieces or gaskets.

Flo-Thru heater assembly, 3” x 13.5”, 304SS, with junction box, cover plate and studs. Includes 2”x2” tail pieces, 2” ridged gaskets.

HydroQuip Platinum-B Series M7™ , 5.5kw 115v/230v flo-thru heater. The tube measures 15" x 2" and comes complete with a 24" cord and two Balboa M7™ sensors. For use exclusively with the HydroQuip Platinum B series control systems featuring slide heater technology.

Heater, Remote FloThru, BWG, VS100, 4.0kw

HydroQuip Platinum-B Series M7™ , 4.0kw 115v/230v L-shaped heater. The tube's longest length measures 17" x 2" and comes complete with a 24" cord and two Balboa M7™ sensors. For use exclusively with the HydroQuip Platinum B series control systems featuring slide heater technology.

HydroQuip Platinum-B Series M7™ , 4.0kw 115v/230v flo-thru heater. The tube measures 15" x 2" and comes complete with a 60" cord and two Balboa M7™ sensors. For use exclusively with the HydroQuip Platinum B series control systems featuring slide heater technology.

HydroQuip Platinum-B Series M7™ , 5.5kw 115v/230v flo-thru heater. The tube measures 15" x 2" and comes complete with a 60" cord and two Balboa M7™ sensors. For use exclusively with the HydroQuip Platinum B series control systems featuring slide heater technology.

HydroQuip Platinum-B Series M7™ , 4.0kw 115v/230v flo-thru heater. The tube measures 15" x 2" and comes complete with a 24" cord and two Balboa M7™ sensors. For use exclusively with the HydroQuip Platinum B series control systems featuring slide heater technology.